At the Third & Elm Press, the printing process encompasses a range of manual and mechanical techniques based on the capabilities of the shop’s two presses. Ilse prints her work on an 18th-century Acorn hand press or a 19th-century Golding platen press. Detailed below are some of the techniques she uses, in particular her innovative process of printing a multi color print from a single block.	Figure 1: The Press
A great clattering rig of iron, the 1897 Golding Platen Press is a prime example of the industrial revolution and the height of printing technology in its time. The basic operation of the press is simple but like the operation of many old machines it is a bit dangerous.	Figure 2: Operating the press
A motorized drive powers the mechanism which repeatedly passes the ink rollers up to the platen where they collect ink and then down over the type. The type and wood blocks are held vertically in the press within a steel frame.	Figure 3: Passing the paper
As the press opens, the printed sheet is removed and a fresh sheet is quickly inserted. The platen closes, applying hundreds of pounds of pressure to form the impression of the block on the paper. In a smooth, continuous rhythm, Ilse passes the paper through the machine as it opens and closes. Like the operator of any moving machinery, she must remain keenly aware of the position of her hands and the working press bed.	Figure 4: Setting the type
The lines of type are set by hand. Each letter is gathered from its specific compartment in the type case. One case holds one font.	Figure 5: Block ready for printing
The set type and woodblock for two projects wait for printing where they will be locked in the steel frame with the expanding spacers.	Figure 6 Locking the type